Fuel Management Services for Aviation
BMS Group is a trusted specialist in fuel management services for aviation customers across the UK and around the world. Our clients include commercial airports, private airfields, and MOD sites, all of which rely on us for safe, efficient, and fully compliant refuelling operations.
From ground fuelling systems and tanker solutions to inspections, calibrations and full fleet EMR4 upgrades, we help extend the life and reliability of aviation fuelling equipment while minimising downtime and operational disruption. To get expert advice or a quote, call us on 01233 740149 or email sales@bms-ltd.com.
Aviation Fuel Management Services & Products We Provide
BMS Group offers a complete range of ground fuelling inspections, maintenance and upgrade services, delivered by experienced CompEx and OFTEC-qualified engineers. We also offer a wide range of Aviation fuel management products.
Calibration & Certification
Accurate fuel measurement is critical for safety, cost control and asset protection. Our engineers ensure aviation fuel management systems operate correctly and efficiently.
- Calibration, ensuring meter reading accuracy, fully compliant with JIG regulations
- Identification of potential failures; prevention of inaccurate meter readings that can cause tank damage or financial loss
- Official calibration certificates issued on completion
System Monitoring & Fault Identification
We inspect ground fuelling systems to proactively identify faults before they cause disruption, helping operators avoid unplanned downtime and costly repairs.
Pulser Inspection, Repair & Replacement
Pulsers are electronic devices that measure fuel flow and must be protected from any contact with the fuel.
- Inspection of pulser operation and spindle seals
- Identification of contamination risks
- Repair or replacement to restore accurate fuel measurement
Bulk Meter Leak Detection, Repair & Maintenance
Bulk meters control fuel flow and measure volume. Our engineers identify leaks, carry out repairs and maintain bulk meters to ensure consistent accuracy and reliable performance.
Pressure Control Valve Inspection & Refurbishment
Fuel exits the ground at 100–150 psi and must be reduced before reaching the aircraft. Aviation fuel pressure must not exceed 45 psi.
- Inspection of bottom-loading valves, foot valves and in-line control valves
- Leak detection, refurbishment or repair
- Pressure control to prevent aircraft tank or equipment damage
Full Fleet Upgrades
Over time, bulk meter components wear and affect accuracy.
- Full inspection of fleet bulk meters
- Adjustment and replacement of worn components
- On-site repairs using parts carried by our engineers
- Expert advice to improve long-term performance and reliability
EMR4 Upgrades
Modernisation of electronic register systems to improve accuracy, reliability and integration with fuel management systems.
Large Figure Display Installation & Maintenance
Installation, servicing, and repair of Large Figure Displays to improve visibility, accuracy, and operational efficiency.
Reliable Supply & Support of Aviation Equipment
We stock and supply a wide range of aviation equipment manufactured by industry leaders such as Parker-Meggitt, TCS, Veeder-Root, and others. The majority of our aviation equipment is readily available off-the-shelf from our UK warehouses, which we plan to expand in the near future. Most items can be shipped with next-day delivery across the UK, helping to minimise downtime and maximise operational efficiency for your aviation business. In addition, our team can professionally install and maintain all equipment we supply, ensuring long-term performance and compliance with aviation standards. Some of the products we supply are:
- Low-pressure Overwing Nozzles
- High-pressure Overwing Nozzles
- Positive Displacement (PD) Bulk Meters
- Display Interfaces
- Mechanical Registers
- Electrical Registers
- Fuel Management Systems
- Pressure Control Valves
- Stabilisers
- Large Figure Displays (Pumptronics)
Why Choose BMS Group for Aviation Fuel Management?
From expert services to high-quality product supply, BMS Group is your one-stop trusted partner for complete fuel management solutions:
- All services delivered in strict compliance with JIG, DMG14 and HM20 regulations
- Rapid refuelling solutions to minimise downtime
- Highly qualified CompEx and OFTEC engineers
- End-to-end support: inspection, maintenance, upgrades and product supply
- Proven experience across commercial, private and MOD aviation sites
BMS Group is a global specialist in high-quality ground fuelling products, services and fuel management systems. Based in the UK, we support aviation operations across the UK and worldwide by supplying advanced, proven solutions from industry-leading manufacturers, including Parker Meggitt, Veeder-Root and TCS.
Our expertise spans mechanical, electrical and environmental services, enabling us to deliver reliable, end-to-end support for aviation fuelling infrastructure across commercial, private and defence sites.
Beyond products and maintenance, BMS Group is committed to knowledge sharing and continuous improvement, delivering technical training worldwide to support safe, efficient and compliant fuelling operations. We don’t just get the job done – we go the extra mile to ensure your aviation refuelling operations are efficient, reliable and hassle-free.
Industry Knowledge & Insights
Our certified engineers have in-depth expertise in the aviation industry. They work closely with your fuelling team, fostering long-term relationships and building a good understanding of your business and your aviation requirements. Our engineers offer:
- Close collaboration with airport or airfield operations
- Understanding of operational requirements and customer expectations
Aviation Regulations & Compliance
All BMS Group aviation fuel management services fully comply with the latest industry regulations, including DMG14, HM20 regulations and JIG (Joint Inspection Group) standards.
Our engineers work to the highest professional standards, ensuring all systems operate within approved aviation pressure limits and meet current regulatory and safety requirements. Compliance, reliability and safety are central to every service we deliver.
Aviation Customer Training
Certifications and Training Flexibility
We provide comprehensive training clinics worldwide, including Hong Kong, Saudi Arabia, the United Arab Emirates, Spain, Italy, Portugal, Singapore, Mauritius and other locations. As part of our service, we also supply all necessary aviation equipment, including nozzles, pressure controllers, and other essential components.
Training
Certified engineers train your team on aviation equipment, including nozzles, pressure controllers and more.
Certified Expertise
All trainees receive BMS certification for aviation equipment training.
Flexible Locations
Training delivered in-house, at our Ashford workshop, or anywhere in the UK and worldwide.
Aviation Customer Support
Our team of experts is here to help with any requirements, providing professional advice on a comprehensive range of aviation, mechanical & electrical, and environmental services. To get a quote
call 01233 740149 or email sales@bms-ltd.com
Working with global brands.
We're extremely proud to be working with and distributing for some of the leading global brands.
