Flow Meter Solutions for Paint & Coating Manufacturers

Accurate Chemical Flow Measurement for Paint, Coatings, Resins, Solvents & Thinners

In paint and coatings manufacturing, accurate batching is essential. Resins, solvents, thinners and other chemicals need to be transferred and measured in the correct quantities to maintain product quality and avoid costly waste.

BMS Group provides specialist flow meter supply, installation, calibration, servicing and refurbishment for paint and coating manufacturers. From individual chemical flow meters to complete batching and dispensing applications, we help keep your production equipment accurate, reliable and ready for use.

Whether you manufacture automotive paints, industrial coatings, marine coatings, resins, solvents or specialist chemical products, we can help you select and maintain flow measurement equipment suited to your process.

To get expert advice on your batching processes, get a quote, or book an engineer’s visit, call us on 0345 230 7887 or email sales@bms-ltd.com.

Why Accurate Flow Metering Matters in Paint Manufacturing

Paint and coating formulations can depend on precise quantities of several different liquids. If a flow meter is inaccurate, worn or incorrectly specified, even a relatively small measurement error can affect the finished batch.

That can lead to:

• Incorrect paint or coating formulations
• Wasted raw materials
• Rejected or reworked batches
• Inconsistent product quality
• Lost production time
• Increased manufacturing costs
• Unplanned maintenance and downtime

Regular flow meter calibration and maintenance help manufacturers identify measurement problems before they result in significant product loss.

For facilities operating several mixing or batching bays, maintaining accuracy across every meter is particularly important. One incorrectly measuring flow meter can compromise an otherwise correctly controlled production process.

Chemical Flow Meters for Paint, Resin and Solvent Applications

Different chemicals have different characteristics. Viscosity, temperature, flow rate and chemical compatibility can all influence which meter, seals and accessories should be used.

BMS Group’s experienced specialists can help specify chemical flow meters for products including:

• Paints and coatings
• Resins
• Solvents
• Paint thinners
• Cleaning fluids
• Oils and petroleum-based liquids
• Additives
• Other industrial chemicals

Before recommending equipment, we can review the application and relevant product data or safety data sheets to check compatibility with the meter and its seals.

Where standard seals are unsuitable for a particular chemical, alternative materials or a specialist meter configuration may be required.

Mechanical Flow Meters for Hazardous and Industrial Environments

Paint and chemical manufacturing facilities can contain hazardous or potentially explosive areas. This makes equipment selection especially important.

Depending on the application, a mechanical flow meter can provide a straightforward and robust solution without requiring an electronic display or power supply at the measurement point.

Where electronic measurement and control are required, safe flow metering systems may also be available for suitable hazardous-area applications. The exact equipment and installation requirements should always be assessed against the site’s hazardous-area classification and operating conditions.

BMS Group can work with your engineering team to establish the most appropriate solution for your process. To talk to our specialists about your project, call us on 0834 230 7887 or email sales@bms-ltd.com.

Flow Meter Calibration for Paint & Coating Plants

A flow meter needs to do more than simply register that liquid is moving. It needs to measure accurately.

BMS Group provides flow meter calibration services for chemical and paint manufacturing facilities, helping engineering and maintenance teams verify that meters continue to measure within the required tolerances.

For plants operating multiple production or mixing bays, we can support calibration covering numerous meters across the facility. Talk to our engineers to find out how we can support your business requirements, call on 0345 230 7887 or email sales@bms-ltd.com.

Regular calibration can help you:

• Maintain batching accuracy
• Improve confidence in production quantities
• Reduce unnecessary product loss
• Identify deteriorating meter performance
• Support quality-control procedures
• Reduce the risk of incorrect formulations
• Plan maintenance before equipment fails

If your facility has a large installed base of meters, talk to us about Planned Preventative Maintenance (PPM) and calibration. We are here to help. Call us on 0345 230 7887 or email sales@bms-ltd.com.

Flow Meter Supply & Installation

Need a new meter or to replace an existing unit?

BMS Group can supply and install flow meters for chemical batching and liquid transfer applications.

Correct meter selection depends on several factors, including:

What liquid are you measuring?
We need to understand the chemical properties of the product and confirm compatibility with the meter’s materials and seals.

What is the required flow rate?
Both minimum and maximum flow rates are important. A meter needs to operate within its specified range to provide reliable measurement.

What is the viscosity of the product?
A thin solvent behaves very differently from a viscous resin or coating, so viscosity needs to be considered when selecting equipment.

What temperatures are involved?
Product and operating temperatures can affect equipment and seal selection.

Is the meter installed in a hazardous area?
Where equipment is used within a hazardous or explosive atmosphere, the appropriate equipment, certification and installation method must be established.

How is the liquid being dispensed or batched?
Depending on the process, additional equipment such as strainers, preset valves or other accessories may be required.

For more complex applications, we can arrange a site assessment to understand the existing system before recommending a solution.

Preset Valves, Strainers & Flow Meter Accessories

The meter itself is only one part of a reliable batching or dispensing system.

BMS Group can also support associated equipment, including preset valves, strainers and flow meter accessories.

Preset valves can be particularly useful within batching and dispensing operations where controlled quantities of liquid need to be delivered. We can inspect and refurbish suitable units, helping customers extend equipment life rather than automatically replacing serviceable components.

For sites with their own engineering departments, we can also support a service-exchange and spares strategy. Your engineering team can keep refurbished equipment on the shelf, replace units when required and return removed equipment to us for inspection and refurbishment.

This helps maintain readily available spares while reducing the risk of production being delayed while waiting for a repair.

Flow Meter Servicing, Repairs & Refurbishment

Industrial flow meters operate in demanding environments and will eventually require attention.

Our support can include:

• Flow meter servicing
• Calibration
• Fault diagnosis
• Repairs
• Refurbishment
• Preset valve refurbishment
• Seal replacement
• Replacement meters and components
• Installation
• Associated pipework maintenance
• Leak investigation and repair

Instead of waiting for a meter to fail completely, Planned Preventative Maintenance can help your engineering team identify wear and maintain reliable operation.

A Complete Flow Meter Service for Chemical Manufacturers

BMS Group can support equipment throughout its working life.

Project Planning → Supply → Installation → Calibration → Maintenance → Repair → Refurbishment

This means you have one specialist to call whether you’re replacing a single meter, investigating an inaccurate batching process or maintaining dozens of flow meters across a manufacturing facility.

Frequently Asked Questions

What type of flow meter is suitable for paint and chemicals?

It depends on the chemical being measured, viscosity, temperature, required flow rate, operating pressure, and installation environment. At BMS Group, we can review your application and product information before recommending a suitable meter. Talk to our specialists on 0345 230 7887 or email sales@bms-ltd.com.

Can a flow meter handle solvents and paint thinners?

Suitable flow meters can be used with many solvents, thinners and other chemicals, but material and seal compatibility must be confirmed for the particular product. Providing the relevant product data or safety datasheet helps us assess compatibility. To receive specialist advice, call BMS Group on 0345 230 7887 or email sales@bms-ltd.com.

What flow rate can a chemical flow meter handle?

This depends on the meter model. Every flow meter has a specified minimum and maximum operating range. At BMS Group, we can help you establish the litres-per-minute requirement of your process before recommending equipment. To get expert advice, call us on 0345 230 7887 or email sales@bms-ltd.com

Can you calibrate existing flow meters?

Yes. BMS Group provides flow meter calibration for industrial and chemical applications, including sites operating multiple meters across production and batching areas. To get advice or book your meter calibration, call BMS Group on 0345 230 7887 or email sales@bms-ltd.com.

Can you repair or refurbish flow meters?

At BMS Group, we repair, refurbish, and service all-brand flow meters. We can assess the equipment and recommend repair or refurbishment.

Do you refurbish preset valves?

Yes. BMS Group specialists can support the refurbishment of suitable preset valves and related flow-meter equipment, allowing engineering teams to maintain spare units for rapid replacement. To get your unit refurbished, give us a call on 0345 230 7887 or email sales@bms-ltd.com.

Can you provide flow meters for hazardous areas?

Yes. Mechanical meters and suitably certified intrinsically safe electronic systems can be considered depending on the application. Hazardous-area classification, equipment certification and the complete installation must be reviewed before a solution is specified. Call BMS Group specialists to receive custom advice and to find out how we can help with your specific requirements: 0345 230 7887 or email sales@bms-ltd.com.

Can you install the flow meter as well as supply it?

Yes. At BMS Group, we can support both flow meter supply and installation, as well as ongoing calibration, servicing and maintenance. To get a quote or specialist advice, call us on 0345 230 7887 or email sales@bms-ltd.com.

What information do you need to recommend a flow meter?

Typically, we need the product’s type, minimum and maximum flow rate, viscosity, operating temperature and pressure, pipe size, hazardous-area classification where applicable, and details of the existing installation.

Need a Flow Meter for a Paint or Coating Manufacturing Process?

Whether you need to calibrate existing chemical flow meters, replace an unreliable meter, refurbish preset valves or specify a new batching meter, BMS Group can help.

Send us details of the liquid you are measuring, your required flow rate and information about the application. For more complex installations, we can arrange to assess the system and recommend a suitable solution.

Speak to BMS Group about flow meters for paints, coatings, resins, solvents and chemical batching applications. Call us on 0345 230 7887 or email sales@bms-ltd.com.

Supporting: chemical flow meter calibration, batching flow meters, resin flow meters, solvent flow meters, flow meters for thinners, industrial flow meter supplier, mechanical chemical flow meters, chemical batching meters, flow meter installation, flow meter servicing, flow meter repair, preset valve refurbishment, hazardous area flow meters, intrinsically safe flow meters.