Tank Gauge – C2020 +/- 1%

Key Features:

• Suitable with diesel, biodiesel up to B100, AdBlue® and antifreeze
• Accuracy +/-1% of tank capacity
• Suits tanks 0.3m – 5m high
• Probe cable can be extended to 100m (CABLE-4-BLACK)
• Electronic display with backlight (turns off after 1 hour)
• Weatherproof to IP65
• Gives continuous readout in liter’s and shows a % bar
• Power supply can be 230V, 110V or 24VDC
• Can connect to a BMS (building management system) via 4-20 ma output
• Tank probes are an electronic pressure sensor with a 1” BSPT fitting
• Level probes must be suspended 50mm from the bottom of the tank
• 1 gauge required per tank
• C2020-A-C23 with high/low-level alarm, can also have a bund probe or water sensor
• Version for 5m high tanks (C2020-A-C25)
• Bund probe (B8) or water bottom sensor (B2)
• If extending the probe cable on non-ATEX O.L.E gauges low loss cable must be used (CABLE-4-BLACK) and junction box (TXX-JBOX-KIT)
• Set up by us within 24 hours from receipt of your tank questionnaire (CALIB-C2020) or can be set up from the front panel